TOWING 拖缆设备
     DECK FITTING 甲板设备
     DIESEL ENGINE 柴油机
     DIESEL ENGING2 柴油机2
     FORGING & CASTING 铸锻件
     柴油机产品3
     柴油机产品产品5
     船舶产品
     船舶产品2
     柴油机产品7
     船用发动机
     船用排气管
 
     About 
     The Me
 
技术交流
 
About stainless steel

Many types of stainless steels have been developed to resist different corrosion environments and working conditions ensuring that factories are safe, structures last longer and our food is hygienic. Stainless steel is even used for in systems to clean up the exhaust gases from cars and power stations.

Stainless steel is also recyclable: when scrapped, it can be re-melted to make something new.

Effect of Chromium

Stainless steels are chromium containing steel alloys. The minimum chromium content of the standardised stainless steels is 10.5%. The Chromium makes the steel “stainless” and this means improved corrosion resistance

The better corrosion resistance is due to a chromium oxide film that is formed on the steel surface. This extremely thin layer, under the right conditions, is also self-repairing.

Besides chromium, typical alloying elements are molybdenum, nickel and nitrogen. Nickel is mostly alloyed to improve the formability and ductility of stainless steel. Alloying these elements brings out different crystal structures to enable different properties in machining, forming, welding etc.

The four major types of stainless steel are:

  • Austenitic
  • Ferritic
  • Austenitic-Ferritic (Duplex)
  • Martensitic

Austenitic is the most widely used type of stainless steel. Nickel and manganese are two alloying elements that will make the structure fully austenitic if added in appropriate amounts. An austenitic structure promotes ductility, non-magnetic properties, good weldability and possibilities for a wide range of service temperatures. The range of applications of austenitic stainless steel includes housewares, containers, industrial piping and vessels, architectural facades and constructional structures.

Ferritic stainless steel has properties similar to mild steel but with the better corrosion resistance. The most common of these steels are 12% and 17% chromium containing steels, with 12% used mostly in structural applications and 17% in housewares, boilers, washing machines and indoor architecture.

Austenitic-Ferritic (Duplex) stainless steel has a ferritic and austenitic lattice structure - hence common name: duplex stainless steel. Duplex stainless steels have a smaller nickel-content than the austenitic grades. The structure is 50 % ferritic and 50 % austenitic and this gives a layered structure with high strength. The Duplex grades are widely used in tank applications, pulp & paper industry, oil& gas industry and in desalination.

Martensitic stainless steel contains mostly 11 to 13% chromium and is both strong and hard with moderate corrosion resistance. This steel is mostly used in turbine blades and in knives.

 
 
 
   

CHONGQING SAI KE XIN INDUSTRIAL & TRADING CO.,LTD
ADDRESS: 6 -2, NO.10 JIAN DONG YI CUN. JIANG BEI DISTRICT.
CHONG QING. CHINA. POST CODE:400020 FAX: 0086-23-67860247
TEL: 0086-23-67852357
E-MAIL: hp8921@sina.com     lonke@139.com